Posted by Vaughn [172.69.140.187] on Saturday, July 20, 2024 at 08:50:49 :
In Reply to: Ventilator Wing Weatherstrip Brass Spacer posted by Dave In Long Beach [162.158.186.161] on Friday, July 19, 2024 at 20:48:22 :
- My original weatherstrip had the mushroom on the same side as the screw head pressed into the rubber. I assume this is to hold the weatherstrip down once the screw is tight.
- Make sure the wing vent glass is cut at the top where the upper hinge/rivets are for clearance. If you need a photo let me know.
- If you haven't checked to see if the handle closes the frame easy, do that before installing the glass, you may have to tweak the frame.
Follow Ups: