Posted by Keith in Washington [162.158.41.86] on Thursday, November 28, 2024 at 14:40:34 :
In Reply to: Transfer Case seals posted by Dan Saucy [172.70.214.246] on Thursday, November 28, 2024 at 14:10:50 :
If you are talking about the seals for the yokes, then I suggest the following. Remove drivelines then the nut holding the yoke on (you will need a large socket and flex bar). Then remove the yoke. That leaves the seal ready to remove. I drill 2 holes opposite each other on the metal seal and use a slide hammer with the screw attachment to remove them. I have also used a small "J" hook on the slide hammer to pull the seal. Then you can carefully tap in the new seal. While you're at it you might want to use a speedy sleeve on the yoke to prevent leakage through the wear groves.
Follow Ups: